|
ADJUSTABLE SUPPORT ANGLES
Designed to support the back of equipment that is rack mounted to front
rails only. Supports 200 lbs. Available in 24-30"depth and 30-36"depth.
Sold in pairs.
Use in server cabinet or rack See our
accessories page for on-line ordering.
RETRACTABLE ANTI TIP STABILIZER BARS
Designed to keep enclosure from tipping when sliding heavy
equipment out the front. Retractable leveling pads. Use in server cabinet
or rack.
Note: these should be added with original cabinet purchase. Not available
as an add-on.
BOTTOM PANELS
Cabinet ships standard with an open bottom. Bottom panels are available in
solid and perforated. Use in server cabinet or rack.
CABLE MANAGEMENT
All standard 19" d-rings, horizontal cable managers, etc. will fit. See
relay rack option links for additional variety. Shown are CMR2x3R, CMR3x3R
and CMR4x5R. Each can be spot welded to the vertical support bar or rail
and ordered as a separate cable management system. Use in server cabinet,
rack, wall mount cabinet as well as TELCO relay rack.
Click here for
enlarged examples
DOORS
A. Vented Lexan Door
B. Lexan Door
C. Full Mesh/Perforated Door
D. Steel Mesh/Perforated Door
E. Vented Steel Door
Typical Door Features:
 Locking,
swing handle latches; keyed alike, color black
Lift-off
hinges for easy equipment installation
Field
reverse-able for left or right side hinging
Standard
powder coat finish
Call for pricing
Lexan and full perforated door are extruded aluminum frame construction.
The steel perf inset and vented door is made of 16 ga steel. Use on server
cabinet or rack.
|
FANS
Top Mount. Your choice of top mount exhaust fans.
Available in 10" 535 cfm. Includes (2) finger guards, (1) 6' cord with
nema 5-15 plug and strain relief. 4.5" fan is 105 cfm and includes (2)
finger guards, (1) 6' cord.
19" Rackmount Fan
Panel. (2) 105 cfm fans with
power cord. Use in server cabinet or rack.
FILLER PANELS
19" and 24" widths. Available from 1u through 16u, in 1u
increments. Use in server cabinet, rack or wall mount cabinet.
JOINING KIT
Joining Kit for Multi-bay applications. Total of 4 brackets/set. Two at
top and two at bottom. Use with server cabinet or rack.
KEYBOARD TRAYS
(click here to enlarge)
FSKBT19 Accommodates a full size keyboard and mounts in 19" rack Pull out
swivel tray, mouse and wrist area in front..
KBT19 Accommodates a 16" keyboard and mounts in 19" rack.
mouse pad in rear corner.
KBT24 Accommodates a full size keyboard and mounts in 24" rack,
mouse pad in rear corner. Use in server cabinet or rack.
LUANN 2
& 4 PACKAGING
Our server cabinets and frames are packed to industry/shipping standards,
but shipping damage does occasionally occur. Luann 2 plywood, cut to size,
protects the sides of cabinet in addition to the honeycomb stretch wrap;
Luann 4 provides plywood on all four sides. Murphy's law exists. Luann 2 -
$20, Luann 4 - $30. Use with server cabinet or rack.
REDUCER BRACKETS
Designed to reduce a 23" or 24" mounting pattern down to 19". Priced per
pair. Available in 1u increments from 1u - 14u.
Use in server cabinet
or rack.
UTILITY DRAWER
Available in 19", 23" and 24" widths. Depth on all is 21". Heights: 3u and
4u. Use in server cabinet or rack.
REDUCER RAILS
Reduces a 24" cabinet mounting pattern when used in place of
standard rails to a 19" or 23" mounting pattern. Use in server
cabinet or rack. |
SCREWS
See our accessories page for
on-line screw ordering.
10-32.
Hardware kit consisting of clip nuts, button
head screws. Available in packs of 50, 100.
1/2" screws
Starter point
Spring nuts
Clip nut or cage nut available separately
12-24
12-24 Phillips head. Available in 50 and 100 packs
M6
Hardware kit consisting of cage nuts, M6 x
3/4" screws, M6 nylon washers. Available in packs of 50 and 100.
1/4-20 x 1/2" buttonhead screws. Available in
50 and 100 packs.
1/4-20 Spring Nuts: Available in packs of 50
and 100.
1/4-20 Nut clips: available in packs of 50
and 100. Use in server cabinet. rack, wall mount cabinet or TELCO
rack
SHELVES
See our
accessories page for on line shelf ordering. Shelves available in 19",
23" and 24" widths, depths of 15", 21", 27" and 33". Fixed. Fixed
Adjustable and Sliding. Use in server cabinet or rack.
SIDE PANELS
Side panels are 18 ga steel and externally removable with a hex
key. If you desire greater security, simply add the part # IR when
ordering. These will be screwed on from the inside at the factory. Use in
server cabinet or rack.
TOPS
A. Fan Top with Fan
B. Solid Top
C. Perforated Top (63%open)
Features:
Externally
removable with Hex key
Cable
access holes, with grommets and cover plates available.
Inside
removable as custom option
Customization
available on request
Standard
powder coat finish
Fan
top with fan is available with one (1) or two (2) 535 cfm fans or
two (2) 105 cfm fans.
Sizes available: 19", 20" and 24"w and 24", 30", 36" and 42"d.
Use in server cabinet or rack.
TWIN TOWER SLIDING SHELVES
19" or 24" wide. 27"d, 100 lb weight capacity each slide. 19"
$387.27, 24" $419.50
VERTICAL
SUPPORT BAR
Made of aluminum extrusion, mounts to upper and lower
crossties. Allows the mounting of power strips, cable management rings,
and other accessories. Comes with hardware to mount cabinet: (4) 1/4-20
springnuts and (4) 1/4-20 x 1/2 buttonhead screws. Use in server cabinet
or rack.
VERTICAL SUPPORT RAIL (1)
"C" shaped support rail bolted to side of frame to mount cable
management rings and other accessories. Adjustable front to rear. Mounting
hardware included. Heights include 21", 24", 35", 42", 52", 61", 70", 77"
and 84". Use in server cabinet or rack.
|
